Premium Matt

KEY BENEFITS
• Premium smooth matt finish
• Suitable for interior and exterior walls
• Wax-emulsion technology
• Improved washability
• Dirt and moisture resistant
• Excellent coverage
• Durable and long lasting
• Low odour
• Water based
• Easy application
• Suitable for residential and commercial projects

SUITABLE APPLICATIONS
UltraFlex Premium Matt is suitable for correctly prepared:
• Interior plastered walls
• Exterior plastered walls
• Masonry surfaces
• Previously painted walls in sound condition
• Residential homes
• Offices and commercial properties
• General interior and exterior wall applications
The surface must be clean, dry, stable and correctly prepared before application.

FINISH
Premium Matt
The matt finish helps reduce surface glare and provides a clean, modern appearance.
Surface preparation remains important, as matt coatings do not conceal major surface defects, cracking or
poor plasterwork.

SPREAD RATE
Approximately 7–10 m² per litre per coat, depending on:
• Surface porosity
• Surface texture
• Application method
• Colour
• Existing surface condition
Actual coverage may vary according to site and application conditions.

APPLICATION REQUIREMENTS
A minimum of two coats must be applied.
Additional coats may be required depending on:
• The colour being applied
• The existing surface colour
• Surface porosity
• Surface condition
• The required final finish
Apply only to properly prepared and suitably primed surfaces.

SURFACE PREPARATION
Before applying Premium Matt:
• Remove dust, dirt, grease and loose material.
• Repair cracks and surface defects using the appropriate repair system.
• Remove loose, flaking or poorly adhering coatings.
• Allow new plaster and repairs to cure and dry sufficiently.
• Prime porous, alkaline or previously coated surfaces where required.
• Confirm that the surface is stable and suitable for coating.
For new plaster, masonry or previously painted surfaces, use the appropriate UltraFlex preparation and
primer system.

APPLICATION
Premium Matt may be applied by:
• Brush
• Roller
• Suitable spray equipment
Stir thoroughly before and during use.
Apply evenly and avoid excessive spreading, uneven film build or application over damp and unstable
surfaces.
Follow the applicable Technical Data Sheet for detailed preparation, application, drying and recoating
instructions.

AVAILABLE PACK SIZES
• 20 L
• 5 L
• 250 ml Sample Pod
The 250 ml Sample Pod allows customers to test a colour on the intended surface before purchasing a
larger pack.
Colours may appear different depending on lighting, surrounding finishes, surface texture and the number of
coats applied.

COLOUR INFORMATION
Premium Matt is available in selected UltraFlex colours.
Special colours may be available subject to quantity and manufacturing requirements.
Digital colours displayed on the website are only a guide. Final colour selection should be confirmed using a
physical colour sample or an applied 250 ml Sample Pod wherever possible.

IMPORTANT LIMITATIONS
• Do not apply to dirty, damp, unstable or poorly prepared surfaces.
• Do not use as a substitute for waterproofing repairs.
• Active moisture, structural cracking and coating failure must be corrected before application.
• Exterior application should not take place during rain or when rain is expected before the coating has
dried sufficiently.
• Very porous or absorbent surfaces may require additional preparation or priming.
• Colour and coverage may vary according to the surface and application conditions.
• Apply a minimum of two coats.