UltraFlex Advance

KEY BENEFITS
• Premium flexible roof coating
• Waterproofing membrane
• Silicone water-repellent technology
• Dries to a flexible, rubber-like coating
• Suitable for all correctly prepared roof types
• Flexible and crack resistant
• UV and weather resistant
• Durable exterior protection
• Strong adhesion
• Water based
• Low odour
• Easy application
• 12-year paint-film warranty, subject to terms and conditions

SUITABLE APPLICATIONS
UltraFlex Advance is suitable for correctly prepared:
• Pitched roofs
• Concrete roof tiles
• Cement roof tiles
• Fibre-cement roofs
• Prepared metal roofs
• Previously coated roof surfaces in sound condition
• Roof junctions and correctly detailed waterproofing areas
• Residential, commercial and industrial roof-restoration projects
The existing roof must be stable, clean and suitable for coating.

FINISH
Advance dries to a flexible protective coating designed to provide a durable waterproofing film across the
prepared roof surface.
The final appearance may vary according to:
• Surface profile
• Application method
• Product colour
• Number of coats
• Applied film thickness

COVERAGE AND APPLICATION RATE
For waterproofing performance, UltraFlex Advance must be applied at a total rate of approximately:
1 litre per m² in total
This total application rate is achieved through the complete specified coating system and not as a spread
rate per individual coat.
The actual number of coats required may depend on:
• Roof type
• Surface profile
• Surface porosity
• Application method
• Existing roof condition
• Required film build
The total specified material quantity must be applied to achieve the intended waterproofing film.

SURFACE PREPARATION
Before applying UltraFlex Advance:
• Remove dust, dirt, chalking, grease, mould and surface contamination.
• Remove loose, flaking or poorly adhering coatings.
• Repair damaged tiles, open joints and defective roof components.
• Remove rust from metal surfaces and apply the appropriate primer.
• Correct active leaks, failed flashings and structural defects.
• Repair cracks using the appropriate UltraFlex repair system.
• Ensure the surface is clean, dry, stable and correctly prepared.
• Prime porous or previously coated surfaces where required.
Waterproofing coatings cannot correct structural movement, failed roof construction or defective drainage.

APPLICATION
UltraFlex Advance may be applied by:
• Brush
• Roller
• Suitable spray equipment
Stir thoroughly before and during application.
Apply the product evenly in the specified number of coats until the full required material quantity and film
build have been achieved.
Allow each coat to dry sufficiently before applying the following coat.
Detailed application, drying and recoating requirements must follow the applicable Technical Data Sheet and
system specification.

AVAILABLE PACK SIZES
• 20 L
• 5 L
Approximate total waterproofing coverage at the specified application rate:
• 20 L: approximately 20 m²
• 5 L: approximately 5 m²
Coverage may vary according to surface condition, profile and application losses.

COLOUR INFORMATION
UltraFlex Advance is available in selected roof colours.
Special colours may be available subject to minimum quantities and manufacturing requirements.
Digital colours displayed on the website are only a guide. Final colour selection should be confirmed using
an approved physical sample wherever possible.

WARRANTY
UltraFlex Advance carries a 12-year paint-film warranty, subject to the applicable warranty terms and
conditions.
The warranty requires:
• Correct surface assessment and preparation
• Use of the specified primer and repair products where required
• Application of the complete specified system
• Application at the required total rate of approximately 1 litre per m²
• Compliance with the Technical Data Sheet
• Suitable weather conditions during application
• Proof of purchase
• Proper maintenance of the completed coating system
The warranty does not cover:
• Structural movement
• Defective roof construction
• Failed flashings or drainage
• Substrate failure
• Active rust beneath the coating
• Poor preparation
• Insufficient product application
• Damage caused by external factors

IMPORTANT LIMITATIONS
• Do not apply to dirty, damp, unstable or poorly prepared surfaces.
• Do not apply over active rust or loose existing coatings.
• Do not use the coating to correct structural defects or failed roof construction.
• Do not apply during rain or when rain is expected before the coating has dried sufficiently.
• Ponding, drainage defects and failed flashings must be corrected before application.
• The full specified quantity must be applied to achieve the intended waterproofing film.
• Coverage may vary on heavily textured or porous roof surfaces.
• Roof surfaces must be safe and suitable for access before work begins.
• UltraFlex Advance is not intended for permanent immersion or below-ground waterproofing
applications.